How much does excavation and grading cost in Myrtle Beach, SC?

Most Myrtle Beach homeowners spend between $7,200 – $21,600 on excavation and grading, with an average around $14,400. Local labor prices 4% below the national average, so Myrtle Beach quotes tend to land at the lower end of national ranges.

Why is excavation and grading more or less expensive in Myrtle Beach than elsewhere?

Licensed trade labor in Myrtle Beach runs about 96% of the national average, and the best crews book out fastest in spring and early summer. South Carolina weather drives material choices here, so ask contractors what they install most often in Myrtle Beach and why.

Do I need a permit for excavation and grading in Myrtle Beach, South Carolina?

Most Myrtle Beach, SC projects that change structure, electrical, plumbing or mechanical systems need a permit from the local building department; cosmetic work usually does not. Always confirm current requirements with the local building department before signing a contract, and make sure the permit is pulled by your licensed contractor.

How many quotes should I get in Myrtle Beach?

Get at least three written quotes from licensed, insured South Carolina contractors. Comparing line items — not just the bottom line — is the fastest way to spot an inflated bid in the Myrtle Beach metro market.

How much does excavation and grading cost in 2026?

Most homeowners pay between $7,500 and $22,500, with a national average near $15,000. Small, simple jobs land at the low end; large or premium-material jobs run well above the high end.

What is the cost per cubic yard?

Installed pricing usually runs $50.00 to $150.00 per cubic yard, including labor and materials. Expensive metros can run 15–45% higher than that range.

What drives the price up the most?

Scope and access. Larger quantities lower your per-cubic yard price, but difficult access, demolition of existing work, structural repairs found mid-job, premium materials and rush scheduling each add 8–30%.

Permits are typically required when the work changes structure or ties into electrical, plumbing, gas or mechanical systems. Budget $75–$600 in most cities and confirm whether your contractor pulls it — unpermitted work can block a future home sale.

How long does the job take?

Most residential projects of this type finish in one to five working days once materials are on site. Custom orders, inspections and weather are the usual causes of delay.

How many quotes should I get?

Three. Bids on the same scope commonly vary 20–40%, and the middle bid with the strongest warranty and references is usually the best value — the cheapest bid often excludes prep, disposal or permits.

Home/Cost guides/Excavation and Grading/Myrtle Beach, SC

Myrtle Beach metro · South Carolina

Excavation and Grading cost in Myrtle Beach, SC

Myrtle Beach homeowners typically pay $7,200 – $21,600 for excavation and grading. Local labor and materials price 4% below the national average.

Get my Myrtle Beach estimate Use the Myrtle Beach calculator

Myrtle Beach average

$14,400

Typical low

$7,200

Typical high

$21,600

Per cubic yard

$48 – $145

Sample ZIP

What drives Myrtle Beach pricing

Local labor

Licensed trade labor in Myrtle Beach runs about 96% of the national average, and the best crews book out fastest in spring and early summer.

Permits & code

Most Myrtle Beach, SC projects that change structure, electrical, plumbing or mechanical systems need a permit from the local building department; cosmetic work usually does not.

Climate & conditions

South Carolina weather drives material choices here, so ask contractors what they install most often in Myrtle Beach and why.

Instant cost calculator

Adjust the inputs to see live pricing

Material to move (cubic yards)150 cubic yards

Quality / material level

Site access

Removal / prep work

Timing

Estimated project cost

$8,550 – $11,685

Most homeowners pay around $10,118

Compare quality / material level

Cost by material in Myrtle Beach

Installed Myrtle Beach pricing per cubic yard.

Option	Installed cost	Pros	Cons
Simple grading	$60 – $82	—	—
Standard excavation and haul	$82 – $110	—	—
Rock or difficult soil	$110 – $140	—	—
Excavation with retaining and drainage	$140 – $190	—	—

Where the money goes in Myrtle Beach

A typical $14,400 Myrtle Beach project, broken down by line item.

Labor0.45% · $65
Materials0.38% · $55
Permits & inspections0.05% · $7
Overhead & profit0.12% · $17

Common add-ons

Extras that show up on Myrtle Beach quotes but rarely in the headline price.

Soil haul-off

$19 – $58

Rock breaking

$96 – $290

Erosion control

$480 – $2,900

Compaction testing

$385 – $1,450

Ways to save in Myrtle Beach

Keep excavated soil on site for backfill and berms to avoid haul-off.
Schedule when the ground is dry — wet soil doubles handling time.
Collect three written bids on an identical scope — spreads of 20–40% are normal.
Book in the off-season and stay flexible on the start date to save 5–15%.
Bundle nearby work into one mobilization so you only pay setup and travel once.
Ask what the contractor would change to cut 10% without hurting durability.

Myrtle Beach FAQs

Get a Myrtle Beach price you can budget against

Answer a few questions about your project and we'll model a low, average and premium price for your SC ZIP code — then connect you with vetted local pros.

Get free quotes from certified pros

More Myrtle Beach research

Best excavation and grading companies in Myrtle Beach Excavation and Grading permits in South Carolina Excavation and Grading near me All South Carolina prices

More South Carolina cities

Charleston Columbia Greenville Rock Hill

Other project costs in Myrtle Beach

Fence Installation in Myrtle Beach

$1,440 – $3,840

Roof Replacement in Myrtle Beach

$8,160 – $32,640

Kitchen Remodel in Myrtle Beach

$17,280 – $91,200

HVAC Replacement in Myrtle Beach

$5,280 – $17,280

Deck Building in Myrtle Beach

$4,224 – $11,520

Window Replacement in Myrtle Beach

$432 – $1,440

See every Myrtle Beach cost guide