Fence Installation cost in Los Angeles, CA
Los Angeles homeowners typically pay $1,850 – $4,950 for fence installation. Local labor and materials price 24% above the national average.
Los Angeles average
$3,150
Typical low
$1,850
Typical high
$4,950
Per linear foot
$1 – $56
Sample ZIP
90001
What drives Los Angeles pricing
Local labor
LA crews book 3-6 weeks out and licensed-trade labor runs 20-30% above the national average.
Permits & code
LADBS permits are required for most structural, roofing, electrical and fence work over 6 feet.
Climate & conditions
Dry heat, wildfire zones and coastal salt air push material specs higher in some neighborhoods.
Instant cost calculator
Adjust the inputs to see live pricing
Estimated project cost
$169 – $1,012
Most homeowners pay around $590
Compare fence material
Cost by material in Los Angeles
Installed Los Angeles pricing per linear foot.
| Option | Installed cost |
|---|---|
| Barbed wire | $1 – $7 |
| Electric / invisible | $1 – $7 |
| Woven wire | $2 – $5 |
| Metal chain link | $6 – $50 |
| Wood & privacy | $12 – $25 |
| Composite & Trex | $19 – $56 |
| Vinyl / PVC | $25 – $31 |
| Aluminum or steel | $25 – $37 |
| Wrought iron | $25 – $43 |
| Brick, stone or block | $37 – $74 |
Where the money goes in Los Angeles
A typical $3,150 Los Angeles project, broken down by line item.
- Materials55% · $1,733
- Labor35% · $1,103
- Prep, permits & disposal10% · $315
Common add-ons
Extras that show up on Los Angeles quotes but rarely in the headline price.
Walk gate (per gate)
Driveway or double gate
Automatic gate opener
Old fence removal & haul-off
Per linear foot
Property survey
Building permit
Stain or seal wood fence
Per linear foot
Post-hole drilling in rock
Per post surcharge
Ways to save in Los Angeles
- Get three bids: fence pricing spreads 20–40% between contractors in the same ZIP.
- Build in the off-season (late fall or winter) when crews are hungry for work.
- Share the cost with a neighbor on a shared property line — many split 50/50.
- Keep the run straight and simple; every corner, gate and grade change adds labor.
- Choose 4-foot picket instead of 6-foot privacy where privacy is not needed to cut roughly 15%.
- Do the demo and brush clearing yourself to save $3 to $5 per foot.
- Buy the material yourself only if the pro allows it — most get volume discounts you cannot match.
Los Angeles FAQs
Get a Los Angeles price you can budget against
Answer a few questions about your project and we'll model a low, average and premium price for your CA ZIP code — then connect you with vetted local pros.
Get fence quotes