Fence Installation cost in Pasadena, CA
Pasadena homeowners typically pay $1,900 – $5,100 for fence installation. Local labor and materials price 28% above the national average.
Pasadena average
$3,250
Typical low
$1,900
Typical high
$5,100
Per linear foot
$1 – $58
Sample ZIP
91101
What drives Pasadena pricing
Local labor
Pasadena favors higher-end finishes and historically sensitive work.
Permits & code
Design review and historic preservation can extend permitting.
Climate & conditions
Foothill wildfire exposure raises exterior material standards.
Instant cost calculator
Adjust the inputs to see live pricing
Estimated project cost
$174 – $1,044
Most homeowners pay around $609
Compare fence material
Cost by material in Pasadena
Installed Pasadena pricing per linear foot.
| Option | Installed cost |
|---|---|
| Barbed wire | $1 – $8 |
| Electric / invisible | $1 – $8 |
| Woven wire | $3 – $5 |
| Metal chain link | $6 – $51 |
| Wood & privacy | $13 – $26 |
| Composite & Trex | $19 – $58 |
| Vinyl / PVC | $26 – $32 |
| Aluminum or steel | $26 – $38 |
| Wrought iron | $26 – $45 |
| Brick, stone or block | $38 – $77 |
Where the money goes in Pasadena
A typical $3,250 Pasadena project, broken down by line item.
- Materials55% · $1,788
- Labor35% · $1,138
- Prep, permits & disposal10% · $325
Common add-ons
Extras that show up on Pasadena quotes but rarely in the headline price.
Walk gate (per gate)
Driveway or double gate
Automatic gate opener
Old fence removal & haul-off
Per linear foot
Property survey
Building permit
Stain or seal wood fence
Per linear foot
Post-hole drilling in rock
Per post surcharge
Ways to save in Pasadena
- Get three bids: fence pricing spreads 20–40% between contractors in the same ZIP.
- Build in the off-season (late fall or winter) when crews are hungry for work.
- Share the cost with a neighbor on a shared property line — many split 50/50.
- Keep the run straight and simple; every corner, gate and grade change adds labor.
- Choose 4-foot picket instead of 6-foot privacy where privacy is not needed to cut roughly 15%.
- Do the demo and brush clearing yourself to save $3 to $5 per foot.
- Buy the material yourself only if the pro allows it — most get volume discounts you cannot match.
Pasadena FAQs
Get a Pasadena price you can budget against
Answer a few questions about your project and we'll model a low, average and premium price for your CA ZIP code — then connect you with vetted local pros.
Get fence quotes