How much does pool installation cost in Albuquerque, NM?

Most Albuquerque homeowners spend between $32,900 – $79,900 on pool installation, with an average around $53,600. Local labor prices 6% below the national average, so Albuquerque quotes tend to land at the lower end of national ranges.

Why is pool installation more or less expensive in Albuquerque than elsewhere?

Licensed trade labor in Albuquerque runs about 94% of the national average, and the best crews book out fastest in spring and early summer. New Mexico weather drives material choices here, so ask contractors what they install most often in Albuquerque and why.

Do I need a permit for pool installation in Albuquerque, New Mexico?

Most Albuquerque, NM projects that change structure, electrical, plumbing or mechanical systems need a permit from the local building department; cosmetic work usually does not. Always confirm current requirements with the local building department before signing a contract, and make sure the permit is pulled by your licensed contractor.

How many quotes should I get in Albuquerque?

Get at least three written quotes from licensed, insured New Mexico contractors. Comparing line items — not just the bottom line — is the fastest way to spot an inflated bid in the Albuquerque metro market.

How much does an inground pool cost?

$35,000 to $85,000 installed on average. Vinyl liner pools start near $35,000, fiberglass $45,000 to $85,000 and gunite $60,000 to $150,000.

Which pool type is best?

Fiberglass for lowest lifetime maintenance, vinyl for lowest upfront cost, and gunite when you want a custom shape, depth or integrated spa.

How long does pool installation take?

Two to four weeks for fiberglass, four to eight for vinyl and eight to sixteen weeks for gunite, plus permitting.

What does a pool cost to run each year?

$1,200 to $5,000 per year including chemicals, electricity, heating, water and service.

Does a pool add home value?

Typically 5% to 8% in warm-climate markets where pools are expected, and little to nothing in cold climates where they can even narrow your buyer pool.

Yes. Essentially every jurisdiction requires a barrier of a specified height with self-closing, self-latching gates, and insurers require it too.

Home/Cost guides/Pool Installation/Albuquerque, NM

Albuquerque metro · New Mexico

Pool Installation cost in Albuquerque, NM

Albuquerque homeowners typically pay $32,900 – $79,900 for pool installation. Local labor and materials price 6% below the national average.

Get my Albuquerque estimate Use the Albuquerque calculator

Albuquerque average

$53,600

Typical low

$32,900

Typical high

$79,900

Per square foot of pool

$47 – $140

Sample ZIP

What drives Albuquerque pricing

Local labor

Licensed trade labor in Albuquerque runs about 94% of the national average, and the best crews book out fastest in spring and early summer.

Permits & code

Most Albuquerque, NM projects that change structure, electrical, plumbing or mechanical systems need a permit from the local building department; cosmetic work usually does not.

Climate & conditions

New Mexico weather drives material choices here, so ask contractors what they install most often in Albuquerque and why.

Instant cost calculator

Adjust the inputs to see live pricing

Pool surface area450 square foot of pools

Pool type

Decking

Features

Site access

Estimated project cost

$3,384 – $10,800

Most homeowners pay around $7,092

Compare pool type

Cost by material in Albuquerque

Installed Albuquerque pricing per square foot of pool.

Option	Installed cost	Pros	Cons
Above ground	$2,800 – $11,300	Cheapest by far, no permit in many areas	10-20 year life, adds little home value
Vinyl liner	$32,900 – $61,100	Lowest inground cost, smooth surface	Liner replacement every 7-12 years at $4,000-$6,000
Fiberglass	$42,300 – $79,900	Fast install, low chemical and maintenance cost	Fixed shapes and sizes, crane access needed
Gunite / concrete	$56,400 – $141,000	Any shape or depth, lasts 50+ years	Longest build, resurfacing every 10-15 years

Where the money goes in Albuquerque

A typical $53,600 Albuquerque project, broken down by line item.

Excavation and shell40% · $21,440
Labor22% · $11,792
Decking and hardscape18% · $9,648
Equipment and plumbing13% · $6,968
Permits, fencing and landscaping7% · $3,752

Common add-ons

Extras that show up on Albuquerque quotes but rarely in the headline price.

Attached spa

$7,500 – $23,500

Heater

$1,900 – $5,650

Saltwater system

$1,150 – $3,300

Automatic cover

$7,500 – $18,800

Waterfall or fountain

$1,400 – $9,400

Pool automation and lighting

$1,400 – $5,650

Safety fence

$1,900 – $7,500

Ways to save in Albuquerque

Choose a standard fiberglass shape over a custom gunite design — same swim, far less money.
Phase the project: pool and minimum deck now, spa, cover and landscaping later.
Build in fall or winter when pool crews discount to keep working.
Do your own landscaping restoration after the crews leave.
Get quotes on the complete project including deck, fence and equipment so bids are comparable.

Albuquerque FAQs

Get a Albuquerque price you can budget against

Answer a few questions about your project and we'll model a low, average and premium price for your NM ZIP code — then connect you with vetted local pros.

Get pool quotes

More Albuquerque research

Best pool installation companies in Albuquerque Pool Installation permits in New Mexico Pool Installation near me All New Mexico prices

More New Mexico cities

Santa Fe Las Cruces Rio Rancho

Other project costs in Albuquerque

Fence Installation in Albuquerque

$1,410 – $3,760

Roof Replacement in Albuquerque

$7,990 – $31,960

Kitchen Remodel in Albuquerque

$16,920 – $89,300

HVAC Replacement in Albuquerque

$5,170 – $16,920

Deck Building in Albuquerque

$4,136 – $11,280

Window Replacement in Albuquerque

$423 – $1,410

See every Albuquerque cost guide