How much does pool installation cost in Denton, TX?

Most Denton homeowners spend between $34,300 – $83,300 on pool installation, with an average around $55,900. Local labor prices 2% below the national average, so Denton quotes tend to land at the lower end of national ranges.

Why is pool installation more or less expensive in Denton than elsewhere?

Denton labor prices under the DFW core. Expansive clay soils make foundation work a common line item.

Do I need a permit for pool installation in Denton, Texas?

City permits required for structural and exterior projects. Always confirm current requirements with the local building department before signing a contract, and make sure the permit is pulled by your licensed contractor.

How many quotes should I get in Denton?

Get at least three written quotes from licensed, insured Texas contractors. Comparing line items — not just the bottom line — is the fastest way to spot an inflated bid in the Dallas-Fort Worth market.

How much does an inground pool cost?

$35,000 to $85,000 installed on average. Vinyl liner pools start near $35,000, fiberglass $45,000 to $85,000 and gunite $60,000 to $150,000.

Which pool type is best?

Fiberglass for lowest lifetime maintenance, vinyl for lowest upfront cost, and gunite when you want a custom shape, depth or integrated spa.

How long does pool installation take?

Two to four weeks for fiberglass, four to eight for vinyl and eight to sixteen weeks for gunite, plus permitting.

What does a pool cost to run each year?

$1,200 to $5,000 per year including chemicals, electricity, heating, water and service.

Does a pool add home value?

Typically 5% to 8% in warm-climate markets where pools are expected, and little to nothing in cold climates where they can even narrow your buyer pool.

Yes. Essentially every jurisdiction requires a barrier of a specified height with self-closing, self-latching gates, and insurers require it too.

Home/Cost guides/Pool Installation/Denton, TX

Dallas-Fort Worth · Texas

Pool Installation cost in Denton, TX

Denton homeowners typically pay $34,300 – $83,300 for pool installation. Local labor and materials price 2% below the national average.

Get my Denton estimate Use the Denton calculator

Denton average

$55,900

Typical low

$34,300

Typical high

$83,300

Per square foot of pool

$49 – $145

Sample ZIP

76201

What drives Denton pricing

Local labor

Denton labor prices under the DFW core.

Permits & code

City permits required for structural and exterior projects.

Climate & conditions

Expansive clay soils make foundation work a common line item.

Instant cost calculator

Adjust the inputs to see live pricing

Pool surface area450 square foot of pools

Pool type

Decking

Features

Site access

Estimated project cost

$3,528 – $11,250

Most homeowners pay around $7,389

Compare pool type

Cost by material in Denton

Installed Denton pricing per square foot of pool.

Option	Installed cost	Pros	Cons
Above ground	$2,950 – $11,800	Cheapest by far, no permit in many areas	10-20 year life, adds little home value
Vinyl liner	$34,300 – $63,700	Lowest inground cost, smooth surface	Liner replacement every 7-12 years at $4,000-$6,000
Fiberglass	$44,100 – $83,300	Fast install, low chemical and maintenance cost	Fixed shapes and sizes, crane access needed
Gunite / concrete	$58,800 – $147,000	Any shape or depth, lasts 50+ years	Longest build, resurfacing every 10-15 years

Where the money goes in Denton

A typical $55,900 Denton project, broken down by line item.

Excavation and shell40% · $22,360
Labor22% · $12,298
Decking and hardscape18% · $10,062
Equipment and plumbing13% · $7,267
Permits, fencing and landscaping7% · $3,913

Common add-ons

Extras that show up on Denton quotes but rarely in the headline price.

Attached spa

$7,850 – $24,500

Heater

$1,950 – $5,900

Saltwater system

$1,200 – $3,450

Automatic cover

$7,850 – $19,600

Waterfall or fountain

$1,450 – $9,800

Pool automation and lighting

$1,450 – $5,900

Safety fence

$1,950 – $7,850

Ways to save in Denton

Choose a standard fiberglass shape over a custom gunite design — same swim, far less money.
Phase the project: pool and minimum deck now, spa, cover and landscaping later.
Build in fall or winter when pool crews discount to keep working.
Do your own landscaping restoration after the crews leave.
Get quotes on the complete project including deck, fence and equipment so bids are comparable.

Denton FAQs

Get a Denton price you can budget against

Answer a few questions about your project and we'll model a low, average and premium price for your TX ZIP code — then connect you with vetted local pros.

Get pool quotes

More Denton research

Best pool installation companies in Denton Pool Installation permits in Texas Pool Installation near me All Texas prices

Pool Installation cost near Denton

Pool Installation cost in Dallas, TX

$35,700 – $86,700

Pool Installation cost in Fort Worth, TX

$35,000 – $85,000

Pool Installation cost in Plano, TX

$36,750 – $89,250

Pool Installation cost in Frisco, TX

$37,100 – $90,100

Pool Installation cost in Arlington, TX

$34,650 – $84,150

Pool Installation cost in Irving, TX

$35,000 – $85,000

More Texas cities

McKinney Garland Houston Katy Sugar Land The Woodlands Pearland Pasadena

Other project costs in Denton

Fence Installation in Denton

$1,470 – $3,920

Roof Replacement in Denton

$8,330 – $33,320

Kitchen Remodel in Denton

$17,640 – $93,100

HVAC Replacement in Denton

$5,390 – $17,640

Deck Building in Denton

$4,312 – $11,760

Window Replacement in Denton

$441 – $1,470

See every Denton cost guide