How much does radon mitigation cost in Annapolis, MD?

Most Annapolis homeowners spend between $1,100 – $3,000 on radon mitigation, with an average around $2,050. Local labor prices 20% above the national average, so Annapolis quotes tend to land at the higher end of national ranges.

Why is radon mitigation more or less expensive in Annapolis than elsewhere?

Licensed trade labor in Annapolis runs about 120% of the national average, and the best crews book out fastest in spring and early summer. Maryland weather drives material choices here, so ask contractors what they install most often in Annapolis and why.

Do I need a permit for radon mitigation in Annapolis, Maryland?

Most Annapolis, MD projects that change structure, electrical, plumbing or mechanical systems need a permit from the local building department; cosmetic work usually does not. Always confirm current requirements with the local building department before signing a contract, and make sure the permit is pulled by your licensed contractor.

How many quotes should I get in Annapolis?

Get at least three written quotes from licensed, insured Maryland contractors. Comparing line items — not just the bottom line — is the fastest way to spot an inflated bid in the Annapolis metro market.

How much does radon mitigation cost in 2026?

Most homeowners pay between $900 and $2,500, with a national average near $1,700. Small, simple jobs land at the low end; large or premium-material jobs run well above the high end.

What is the cost per system?

Installed pricing usually runs $900.00 to $2,500.00 per system, including labor and materials. Expensive metros can run 15–45% higher than that range.

What drives the price up the most?

Scope and access. Larger quantities lower your per-system price, but difficult access, demolition of existing work, structural repairs found mid-job, premium materials and rush scheduling each add 8–30%.

Permits are typically required when the work changes structure or ties into electrical, plumbing, gas or mechanical systems. Budget $75–$600 in most cities and confirm whether your contractor pulls it — unpermitted work can block a future home sale.

How long does the job take?

Most residential projects of this type finish in one to five working days once materials are on site. Custom orders, inspections and weather are the usual causes of delay.

How many quotes should I get?

Three. Bids on the same scope commonly vary 20–40%, and the middle bid with the strongest warranty and references is usually the best value — the cheapest bid often excludes prep, disposal or permits.

Home/Cost guides/Radon Mitigation/Annapolis, MD

Annapolis metro · Maryland

Radon Mitigation cost in Annapolis, MD

Annapolis homeowners typically pay $1,100 – $3,000 for radon mitigation. Local labor and materials price 20% above the national average.

Get my Annapolis estimate Use the Annapolis calculator

Annapolis average

$2,050

Typical low

$1,100

Typical high

$3,000

Per system

$1,100 – $3,000

Sample ZIP

What drives Annapolis pricing

Local labor

Licensed trade labor in Annapolis runs about 120% of the national average, and the best crews book out fastest in spring and early summer.

Permits & code

Most Annapolis, MD projects that change structure, electrical, plumbing or mechanical systems need a permit from the local building department; cosmetic work usually does not.

Climate & conditions

Maryland weather drives material choices here, so ask contractors what they install most often in Annapolis and why.

Instant cost calculator

Adjust the inputs to see live pricing

Number of suction points1 system

Quality / material level

Site access

Removal / prep work

Timing

Estimated project cost

$1,188 – $1,663

Most homeowners pay around $1,425

Compare quality / material level

Cost by material in Annapolis

Installed Annapolis pricing per system.

Option	Installed cost	Pros	Cons
Single-point sub-slab system	$1,250 – $1,750	—	—
Sub-slab with sealing	$1,750 – $2,300	—	—
Crawlspace membrane system	$2,300 – $2,950	—	—
Multi-point system with monitoring	$2,950 – $4,100	—	—

Where the money goes in Annapolis

A typical $2,050 Annapolis project, broken down by line item.

Labor0.45% · $9
Materials0.38% · $8
Permits & inspections0.05% · $1
Overhead & profit0.12% · $2

Common add-ons

Extras that show up on Annapolis quotes but rarely in the headline price.

Post-mitigation testing

$180 – $360

Crawlspace vapor barrier

$1,800 – $6,000

Sump pit sealing

$240 – $960

Continuous radon monitor

$180 – $480

Ways to save in Annapolis

Test first with a $20 kit before commissioning a system.
Route the pipe on the least visible elevation to skip cosmetic upgrades.
Collect three written bids on an identical scope — spreads of 20–40% are normal.
Book in the off-season and stay flexible on the start date to save 5–15%.
Bundle nearby work into one mobilization so you only pay setup and travel once.
Ask what the contractor would change to cut 10% without hurting durability.

Annapolis FAQs

Get a Annapolis price you can budget against

Answer a few questions about your project and we'll model a low, average and premium price for your MD ZIP code — then connect you with vetted local pros.

Get free quotes from certified pros

More Annapolis research

Best radon mitigation companies in Annapolis Radon Mitigation permits in Maryland Radon Mitigation near me All Maryland prices

More Maryland cities

Baltimore Columbia Silver Spring Rockville Frederick

Other project costs in Annapolis

Fence Installation in Annapolis

$1,800 – $4,800

Roof Replacement in Annapolis

$10,200 – $40,800

Kitchen Remodel in Annapolis

$21,600 – $114,000

HVAC Replacement in Annapolis

$6,600 – $21,600

Deck Building in Annapolis

$5,280 – $14,400

Window Replacement in Annapolis

$540 – $1,800

See every Annapolis cost guide