How much does radon mitigation cost in Baltimore, MD?

Most Baltimore homeowners spend between $1,050 – $2,850 on radon mitigation, with an average around $1,950. Local labor prices 14% above the national average, so Baltimore quotes tend to land at the higher end of national ranges.

Why is radon mitigation more or less expensive in Baltimore than elsewhere?

Licensed trade labor in Baltimore runs about 114% of the national average, and the best crews book out fastest in spring and early summer. Maryland weather drives material choices here, so ask contractors what they install most often in Baltimore and why.

Do I need a permit for radon mitigation in Baltimore, Maryland?

Most Baltimore, MD projects that change structure, electrical, plumbing or mechanical systems need a permit from the local building department; cosmetic work usually does not. Always confirm current requirements with the local building department before signing a contract, and make sure the permit is pulled by your licensed contractor.

How many quotes should I get in Baltimore?

Get at least three written quotes from licensed, insured Maryland contractors. Comparing line items — not just the bottom line — is the fastest way to spot an inflated bid in the Baltimore metro market.

How much does radon mitigation cost in 2026?

Most homeowners pay between $900 and $2,500, with a national average near $1,700. Small, simple jobs land at the low end; large or premium-material jobs run well above the high end.

What is the cost per system?

Installed pricing usually runs $900.00 to $2,500.00 per system, including labor and materials. Expensive metros can run 15–45% higher than that range.

What drives the price up the most?

Scope and access. Larger quantities lower your per-system price, but difficult access, demolition of existing work, structural repairs found mid-job, premium materials and rush scheduling each add 8–30%.

Permits are typically required when the work changes structure or ties into electrical, plumbing, gas or mechanical systems. Budget $75–$600 in most cities and confirm whether your contractor pulls it — unpermitted work can block a future home sale.

How long does the job take?

Most residential projects of this type finish in one to five working days once materials are on site. Custom orders, inspections and weather are the usual causes of delay.

How many quotes should I get?

Three. Bids on the same scope commonly vary 20–40%, and the middle bid with the strongest warranty and references is usually the best value — the cheapest bid often excludes prep, disposal or permits.

Home/Cost guides/Radon Mitigation/Baltimore, MD

Baltimore metro · Maryland

Radon Mitigation cost in Baltimore, MD

Baltimore homeowners typically pay $1,050 – $2,850 for radon mitigation. Local labor and materials price 14% above the national average.

Get my Baltimore estimate Use the Baltimore calculator

Baltimore average

$1,950

Typical low

$1,050

Typical high

$2,850

Per system

$1,050 – $2,850

Sample ZIP

What drives Baltimore pricing

Local labor

Licensed trade labor in Baltimore runs about 114% of the national average, and the best crews book out fastest in spring and early summer.

Permits & code

Most Baltimore, MD projects that change structure, electrical, plumbing or mechanical systems need a permit from the local building department; cosmetic work usually does not.

Climate & conditions

Maryland weather drives material choices here, so ask contractors what they install most often in Baltimore and why.

Instant cost calculator

Adjust the inputs to see live pricing

Number of suction points1 system

Quality / material level

Site access

Removal / prep work

Timing

Estimated project cost

$1,140 – $1,568

Most homeowners pay around $1,354

Compare quality / material level

Cost by material in Baltimore

Installed Baltimore pricing per system.

Option	Installed cost	Pros	Cons
Single-point sub-slab system	$1,200 – $1,650	—	—
Sub-slab with sealing	$1,650 – $2,150	—	—
Crawlspace membrane system	$2,150 – $2,800	—	—
Multi-point system with monitoring	$2,800 – $3,900	—	—

Where the money goes in Baltimore

A typical $1,950 Baltimore project, broken down by line item.

Labor0.45% · $9
Materials0.38% · $7
Permits & inspections0.05% · $1
Overhead & profit0.12% · $2

Common add-ons

Extras that show up on Baltimore quotes but rarely in the headline price.

Post-mitigation testing

$170 – $340

Crawlspace vapor barrier

$1,700 – $5,700

Sump pit sealing

$230 – $910

Continuous radon monitor

$170 – $455

Ways to save in Baltimore

Test first with a $20 kit before commissioning a system.
Route the pipe on the least visible elevation to skip cosmetic upgrades.
Collect three written bids on an identical scope — spreads of 20–40% are normal.
Book in the off-season and stay flexible on the start date to save 5–15%.
Bundle nearby work into one mobilization so you only pay setup and travel once.
Ask what the contractor would change to cut 10% without hurting durability.

Baltimore FAQs

Get a Baltimore price you can budget against

Answer a few questions about your project and we'll model a low, average and premium price for your MD ZIP code — then connect you with vetted local pros.

Get free quotes from certified pros

More Baltimore research

Best radon mitigation companies in Baltimore Radon Mitigation permits in Maryland Radon Mitigation near me All Maryland prices

More Maryland cities

Columbia Silver Spring Rockville Annapolis Frederick

Other project costs in Baltimore

Fence Installation in Baltimore

$1,710 – $4,560

Roof Replacement in Baltimore

$9,690 – $38,760

Kitchen Remodel in Baltimore

$20,520 – $108,300

HVAC Replacement in Baltimore

$6,270 – $20,520

Deck Building in Baltimore

$5,016 – $13,680

Window Replacement in Baltimore

$513 – $1,710

See every Baltimore cost guide