How much does radon mitigation cost in Bloomington, IN?

Most Bloomington homeowners spend between $820 – $2,300 on radon mitigation, with an average around $1,550. Local labor prices 9% below the national average, so Bloomington quotes tend to land at the lower end of national ranges.

Why is radon mitigation more or less expensive in Bloomington than elsewhere?

Licensed trade labor in Bloomington runs about 91% of the national average, and the best crews book out fastest in spring and early summer. Indiana weather drives material choices here, so ask contractors what they install most often in Bloomington and why.

Do I need a permit for radon mitigation in Bloomington, Indiana?

Most Bloomington, IN projects that change structure, electrical, plumbing or mechanical systems need a permit from the local building department; cosmetic work usually does not. Always confirm current requirements with the local building department before signing a contract, and make sure the permit is pulled by your licensed contractor.

How many quotes should I get in Bloomington?

Get at least three written quotes from licensed, insured Indiana contractors. Comparing line items — not just the bottom line — is the fastest way to spot an inflated bid in the Bloomington metro market.

How much does radon mitigation cost in 2026?

Most homeowners pay between $900 and $2,500, with a national average near $1,700. Small, simple jobs land at the low end; large or premium-material jobs run well above the high end.

What is the cost per system?

Installed pricing usually runs $900.00 to $2,500.00 per system, including labor and materials. Expensive metros can run 15–45% higher than that range.

What drives the price up the most?

Scope and access. Larger quantities lower your per-system price, but difficult access, demolition of existing work, structural repairs found mid-job, premium materials and rush scheduling each add 8–30%.

Permits are typically required when the work changes structure or ties into electrical, plumbing, gas or mechanical systems. Budget $75–$600 in most cities and confirm whether your contractor pulls it — unpermitted work can block a future home sale.

How long does the job take?

Most residential projects of this type finish in one to five working days once materials are on site. Custom orders, inspections and weather are the usual causes of delay.

How many quotes should I get?

Three. Bids on the same scope commonly vary 20–40%, and the middle bid with the strongest warranty and references is usually the best value — the cheapest bid often excludes prep, disposal or permits.

Home/Cost guides/Radon Mitigation/Bloomington, IN

Bloomington metro · Indiana

Radon Mitigation cost in Bloomington, IN

Bloomington homeowners typically pay $820 – $2,300 for radon mitigation. Local labor and materials price 9% below the national average.

Get my Bloomington estimate Use the Bloomington calculator

Bloomington average

$1,550

Typical low

$820

Typical high

$2,300

Per system

$820 – $2,300

Sample ZIP

What drives Bloomington pricing

Local labor

Licensed trade labor in Bloomington runs about 91% of the national average, and the best crews book out fastest in spring and early summer.

Permits & code

Most Bloomington, IN projects that change structure, electrical, plumbing or mechanical systems need a permit from the local building department; cosmetic work usually does not.

Climate & conditions

Indiana weather drives material choices here, so ask contractors what they install most often in Bloomington and why.

Instant cost calculator

Adjust the inputs to see live pricing

Number of suction points1 system

Quality / material level

Site access

Removal / prep work

Timing

Estimated project cost

$912 – $1,235

Most homeowners pay around $1,074

Compare quality / material level

Cost by material in Bloomington

Installed Bloomington pricing per system.

Option	Installed cost	Pros	Cons
Single-point sub-slab system	$960 – $1,300	—	—
Sub-slab with sealing	$1,300 – $1,750	—	—
Crawlspace membrane system	$1,750 – $2,250	—	—
Multi-point system with monitoring	$2,250 – $3,100	—	—

Where the money goes in Bloomington

A typical $1,550 Bloomington project, broken down by line item.

Labor0.45% · $7
Materials0.38% · $6
Permits & inspections0.05% · $1
Overhead & profit0.12% · $2

Common add-ons

Extras that show up on Bloomington quotes but rarely in the headline price.

Post-mitigation testing

$135 – $275

Crawlspace vapor barrier

$1,350 – $4,550

Sump pit sealing

$180 – $730

Continuous radon monitor

$135 – $365

Ways to save in Bloomington

Test first with a $20 kit before commissioning a system.
Route the pipe on the least visible elevation to skip cosmetic upgrades.
Collect three written bids on an identical scope — spreads of 20–40% are normal.
Book in the off-season and stay flexible on the start date to save 5–15%.
Bundle nearby work into one mobilization so you only pay setup and travel once.
Ask what the contractor would change to cut 10% without hurting durability.

Bloomington FAQs

Get a Bloomington price you can budget against

Answer a few questions about your project and we'll model a low, average and premium price for your IN ZIP code — then connect you with vetted local pros.

Get free quotes from certified pros

More Bloomington research

Best radon mitigation companies in Bloomington Radon Mitigation permits in Indiana Radon Mitigation near me All Indiana prices

Radon Mitigation cost near Bloomington

Radon Mitigation cost in Bloomington, MN

$973 – $2,730

More Indiana cities

Indianapolis Fort Wayne Evansville South Bend Carmel

Other project costs in Bloomington

Fence Installation in Bloomington

$1,365 – $3,640

Roof Replacement in Bloomington

$7,735 – $30,940

Kitchen Remodel in Bloomington

$16,380 – $86,450

HVAC Replacement in Bloomington

$5,005 – $16,380

Deck Building in Bloomington

$4,004 – $10,920

Window Replacement in Bloomington

$410 – $1,365

See every Bloomington cost guide