How much does radon mitigation cost in Evansville, IN?

Most Evansville homeowners spend between $790 – $2,200 on radon mitigation, with an average around $1,500. Local labor prices 12% below the national average, so Evansville quotes tend to land at the lower end of national ranges.

Why is radon mitigation more or less expensive in Evansville than elsewhere?

Licensed trade labor in Evansville runs about 88% of the national average, and the best crews book out fastest in spring and early summer. Indiana weather drives material choices here, so ask contractors what they install most often in Evansville and why.

Do I need a permit for radon mitigation in Evansville, Indiana?

Most Evansville, IN projects that change structure, electrical, plumbing or mechanical systems need a permit from the local building department; cosmetic work usually does not. Always confirm current requirements with the local building department before signing a contract, and make sure the permit is pulled by your licensed contractor.

How many quotes should I get in Evansville?

Get at least three written quotes from licensed, insured Indiana contractors. Comparing line items — not just the bottom line — is the fastest way to spot an inflated bid in the Evansville metro market.

How much does radon mitigation cost in 2026?

Most homeowners pay between $900 and $2,500, with a national average near $1,700. Small, simple jobs land at the low end; large or premium-material jobs run well above the high end.

What is the cost per system?

Installed pricing usually runs $900.00 to $2,500.00 per system, including labor and materials. Expensive metros can run 15–45% higher than that range.

What drives the price up the most?

Scope and access. Larger quantities lower your per-system price, but difficult access, demolition of existing work, structural repairs found mid-job, premium materials and rush scheduling each add 8–30%.

Permits are typically required when the work changes structure or ties into electrical, plumbing, gas or mechanical systems. Budget $75–$600 in most cities and confirm whether your contractor pulls it — unpermitted work can block a future home sale.

How long does the job take?

Most residential projects of this type finish in one to five working days once materials are on site. Custom orders, inspections and weather are the usual causes of delay.

How many quotes should I get?

Three. Bids on the same scope commonly vary 20–40%, and the middle bid with the strongest warranty and references is usually the best value — the cheapest bid often excludes prep, disposal or permits.

Home/Cost guides/Radon Mitigation/Evansville, IN

Evansville metro · Indiana

Radon Mitigation cost in Evansville, IN

Evansville homeowners typically pay $790 – $2,200 for radon mitigation. Local labor and materials price 12% below the national average.

Get my Evansville estimate Use the Evansville calculator

Evansville average

$1,500

Typical low

$790

Typical high

$2,200

Per system

$790 – $2,200

Sample ZIP

What drives Evansville pricing

Local labor

Licensed trade labor in Evansville runs about 88% of the national average, and the best crews book out fastest in spring and early summer.

Permits & code

Most Evansville, IN projects that change structure, electrical, plumbing or mechanical systems need a permit from the local building department; cosmetic work usually does not.

Climate & conditions

Indiana weather drives material choices here, so ask contractors what they install most often in Evansville and why.

Instant cost calculator

Adjust the inputs to see live pricing

Number of suction points1 system

Quality / material level

Site access

Removal / prep work

Timing

Estimated project cost

$884 – $1,188

Most homeowners pay around $1,036

Compare quality / material level

Cost by material in Evansville

Installed Evansville pricing per system.

Option	Installed cost	Pros	Cons
Single-point sub-slab system	$930 – $1,250	—	—
Sub-slab with sealing	$1,250 – $1,700	—	—
Crawlspace membrane system	$1,700 – $2,150	—	—
Multi-point system with monitoring	$2,150 – $3,000	—	—

Where the money goes in Evansville

A typical $1,500 Evansville project, broken down by line item.

Labor0.45% · $7
Materials0.38% · $6
Permits & inspections0.05% · $1
Overhead & profit0.12% · $2

Common add-ons

Extras that show up on Evansville quotes but rarely in the headline price.

Post-mitigation testing

$130 – $265

Crawlspace vapor barrier

$1,300 – $4,400

Sump pit sealing

$175 – $705

Continuous radon monitor

$130 – $350

Ways to save in Evansville

Test first with a $20 kit before commissioning a system.
Route the pipe on the least visible elevation to skip cosmetic upgrades.
Collect three written bids on an identical scope — spreads of 20–40% are normal.
Book in the off-season and stay flexible on the start date to save 5–15%.
Bundle nearby work into one mobilization so you only pay setup and travel once.
Ask what the contractor would change to cut 10% without hurting durability.

Evansville FAQs

Get a Evansville price you can budget against

Answer a few questions about your project and we'll model a low, average and premium price for your IN ZIP code — then connect you with vetted local pros.

Get free quotes from certified pros

More Evansville research

Best radon mitigation companies in Evansville Radon Mitigation permits in Indiana Radon Mitigation near me All Indiana prices

More Indiana cities

Indianapolis Fort Wayne South Bend Carmel Bloomington

Other project costs in Evansville

Fence Installation in Evansville

$1,320 – $3,520

Roof Replacement in Evansville

$7,480 – $29,920

Kitchen Remodel in Evansville

$15,840 – $83,600

HVAC Replacement in Evansville

$4,840 – $15,840

Deck Building in Evansville

$3,872 – $10,560

Window Replacement in Evansville

$396 – $1,320

See every Evansville cost guide