How much does radon mitigation cost in Franklin, TN?

Most Franklin homeowners spend between $910 – $2,550 on radon mitigation, with an average around $1,700. Local labor prices 1% above the national average, so Franklin quotes tend to land at the higher end of national ranges.

Why is radon mitigation more or less expensive in Franklin than elsewhere?

Licensed trade labor in Franklin runs about 101% of the national average, and the best crews book out fastest in spring and early summer. Tennessee weather drives material choices here, so ask contractors what they install most often in Franklin and why.

Do I need a permit for radon mitigation in Franklin, Tennessee?

Most Franklin, TN projects that change structure, electrical, plumbing or mechanical systems need a permit from the local building department; cosmetic work usually does not. Always confirm current requirements with the local building department before signing a contract, and make sure the permit is pulled by your licensed contractor.

How many quotes should I get in Franklin?

Get at least three written quotes from licensed, insured Tennessee contractors. Comparing line items — not just the bottom line — is the fastest way to spot an inflated bid in the Franklin metro market.

How much does radon mitigation cost in 2026?

Most homeowners pay between $900 and $2,500, with a national average near $1,700. Small, simple jobs land at the low end; large or premium-material jobs run well above the high end.

What is the cost per system?

Installed pricing usually runs $900.00 to $2,500.00 per system, including labor and materials. Expensive metros can run 15–45% higher than that range.

What drives the price up the most?

Scope and access. Larger quantities lower your per-system price, but difficult access, demolition of existing work, structural repairs found mid-job, premium materials and rush scheduling each add 8–30%.

Permits are typically required when the work changes structure or ties into electrical, plumbing, gas or mechanical systems. Budget $75–$600 in most cities and confirm whether your contractor pulls it — unpermitted work can block a future home sale.

How long does the job take?

Most residential projects of this type finish in one to five working days once materials are on site. Custom orders, inspections and weather are the usual causes of delay.

How many quotes should I get?

Three. Bids on the same scope commonly vary 20–40%, and the middle bid with the strongest warranty and references is usually the best value — the cheapest bid often excludes prep, disposal or permits.

Home/Cost guides/Radon Mitigation/Franklin, TN

Franklin metro · Tennessee

Radon Mitigation cost in Franklin, TN

Franklin homeowners typically pay $910 – $2,550 for radon mitigation. Local labor and materials price 1% above the national average.

Get my Franklin estimate Use the Franklin calculator

Franklin average

$1,700

Typical low

$910

Typical high

$2,550

Per system

$910 – $2,550

Sample ZIP

What drives Franklin pricing

Local labor

Licensed trade labor in Franklin runs about 101% of the national average, and the best crews book out fastest in spring and early summer.

Permits & code

Most Franklin, TN projects that change structure, electrical, plumbing or mechanical systems need a permit from the local building department; cosmetic work usually does not.

Climate & conditions

Tennessee weather drives material choices here, so ask contractors what they install most often in Franklin and why.

Instant cost calculator

Adjust the inputs to see live pricing

Number of suction points1 system

Quality / material level

Site access

Removal / prep work

Timing

Estimated project cost

$998 – $1,378

Most homeowners pay around $1,188

Compare quality / material level

Cost by material in Franklin

Installed Franklin pricing per system.

Option	Installed cost	Pros	Cons
Single-point sub-slab system	$1,050 – $1,450	—	—
Sub-slab with sealing	$1,450 – $1,900	—	—
Crawlspace membrane system	$1,900 – $2,500	—	—
Multi-point system with monitoring	$2,500 – $3,450	—	—

Where the money goes in Franklin

A typical $1,700 Franklin project, broken down by line item.

Labor0.45% · $8
Materials0.38% · $6
Permits & inspections0.05% · $1
Overhead & profit0.12% · $2

Common add-ons

Extras that show up on Franklin quotes but rarely in the headline price.

Post-mitigation testing

$150 – $305

Crawlspace vapor barrier

$1,500 – $5,050

Sump pit sealing

$200 – $810

Continuous radon monitor

$150 – $405

Ways to save in Franklin

Test first with a $20 kit before commissioning a system.
Route the pipe on the least visible elevation to skip cosmetic upgrades.
Collect three written bids on an identical scope — spreads of 20–40% are normal.
Book in the off-season and stay flexible on the start date to save 5–15%.
Bundle nearby work into one mobilization so you only pay setup and travel once.
Ask what the contractor would change to cut 10% without hurting durability.

Franklin FAQs

Get a Franklin price you can budget against

Answer a few questions about your project and we'll model a low, average and premium price for your TN ZIP code — then connect you with vetted local pros.

Get free quotes from certified pros

More Franklin research

Best radon mitigation companies in Franklin Radon Mitigation permits in Tennessee Radon Mitigation near me All Tennessee prices

More Tennessee cities

Nashville Memphis Knoxville Chattanooga Murfreesboro

Other project costs in Franklin

Fence Installation in Franklin

$1,515 – $4,040

Roof Replacement in Franklin

$8,585 – $34,340

Kitchen Remodel in Franklin

$18,180 – $95,950

HVAC Replacement in Franklin

$5,555 – $18,180

Deck Building in Franklin

$4,444 – $12,120

Window Replacement in Franklin

$455 – $1,515

See every Franklin cost guide