How much does radon mitigation cost in Memphis, TN?

Most Memphis homeowners spend between $830 – $2,300 on radon mitigation, with an average around $1,550. Local labor prices 8% below the national average, so Memphis quotes tend to land at the lower end of national ranges.

Why is radon mitigation more or less expensive in Memphis than elsewhere?

Licensed trade labor in Memphis runs about 92% of the national average, and the best crews book out fastest in spring and early summer. Tennessee weather drives material choices here, so ask contractors what they install most often in Memphis and why.

Do I need a permit for radon mitigation in Memphis, Tennessee?

Most Memphis, TN projects that change structure, electrical, plumbing or mechanical systems need a permit from the local building department; cosmetic work usually does not. Always confirm current requirements with the local building department before signing a contract, and make sure the permit is pulled by your licensed contractor.

How many quotes should I get in Memphis?

Get at least three written quotes from licensed, insured Tennessee contractors. Comparing line items — not just the bottom line — is the fastest way to spot an inflated bid in the Memphis metro market.

How much does radon mitigation cost in 2026?

Most homeowners pay between $900 and $2,500, with a national average near $1,700. Small, simple jobs land at the low end; large or premium-material jobs run well above the high end.

What is the cost per system?

Installed pricing usually runs $900.00 to $2,500.00 per system, including labor and materials. Expensive metros can run 15–45% higher than that range.

What drives the price up the most?

Scope and access. Larger quantities lower your per-system price, but difficult access, demolition of existing work, structural repairs found mid-job, premium materials and rush scheduling each add 8–30%.

Permits are typically required when the work changes structure or ties into electrical, plumbing, gas or mechanical systems. Budget $75–$600 in most cities and confirm whether your contractor pulls it — unpermitted work can block a future home sale.

How long does the job take?

Most residential projects of this type finish in one to five working days once materials are on site. Custom orders, inspections and weather are the usual causes of delay.

How many quotes should I get?

Three. Bids on the same scope commonly vary 20–40%, and the middle bid with the strongest warranty and references is usually the best value — the cheapest bid often excludes prep, disposal or permits.

Home/Cost guides/Radon Mitigation/Memphis, TN

Memphis metro · Tennessee

Radon Mitigation cost in Memphis, TN

Memphis homeowners typically pay $830 – $2,300 for radon mitigation. Local labor and materials price 8% below the national average.

Get my Memphis estimate Use the Memphis calculator

Memphis average

$1,550

Typical low

$830

Typical high

$2,300

Per system

$830 – $2,300

Sample ZIP

What drives Memphis pricing

Local labor

Licensed trade labor in Memphis runs about 92% of the national average, and the best crews book out fastest in spring and early summer.

Permits & code

Most Memphis, TN projects that change structure, electrical, plumbing or mechanical systems need a permit from the local building department; cosmetic work usually does not.

Climate & conditions

Tennessee weather drives material choices here, so ask contractors what they install most often in Memphis and why.

Instant cost calculator

Adjust the inputs to see live pricing

Number of suction points1 system

Quality / material level

Site access

Removal / prep work

Timing

Estimated project cost

$922 – $1,283

Most homeowners pay around $1,102

Compare quality / material level

Cost by material in Memphis

Installed Memphis pricing per system.

Option	Installed cost	Pros	Cons
Single-point sub-slab system	$970 – $1,350	—	—
Sub-slab with sealing	$1,350 – $1,750	—	—
Crawlspace membrane system	$1,750 – $2,250	—	—
Multi-point system with monitoring	$2,250 – $3,150	—	—

Where the money goes in Memphis

A typical $1,550 Memphis project, broken down by line item.

Labor0.45% · $7
Materials0.38% · $6
Permits & inspections0.05% · $1
Overhead & profit0.12% · $2

Common add-ons

Extras that show up on Memphis quotes but rarely in the headline price.

Post-mitigation testing

$140 – $275

Crawlspace vapor barrier

$1,400 – $4,600

Sump pit sealing

$185 – $735

Continuous radon monitor

$140 – $370

Ways to save in Memphis

Test first with a $20 kit before commissioning a system.
Route the pipe on the least visible elevation to skip cosmetic upgrades.
Collect three written bids on an identical scope — spreads of 20–40% are normal.
Book in the off-season and stay flexible on the start date to save 5–15%.
Bundle nearby work into one mobilization so you only pay setup and travel once.
Ask what the contractor would change to cut 10% without hurting durability.

Memphis FAQs

Get a Memphis price you can budget against

Answer a few questions about your project and we'll model a low, average and premium price for your TN ZIP code — then connect you with vetted local pros.

Get free quotes from certified pros

More Memphis research

Best radon mitigation companies in Memphis Radon Mitigation permits in Tennessee Radon Mitigation near me All Tennessee prices

More Tennessee cities

Nashville Knoxville Chattanooga Franklin Murfreesboro

Other project costs in Memphis

Fence Installation in Memphis

$1,380 – $3,680

Roof Replacement in Memphis

$7,820 – $31,280

Kitchen Remodel in Memphis

$16,560 – $87,400

HVAC Replacement in Memphis

$5,060 – $16,560

Deck Building in Memphis

$4,048 – $11,040

Window Replacement in Memphis

$414 – $1,380

See every Memphis cost guide