How much does radon mitigation cost in Winston-Salem, NC?

Most Winston-Salem homeowners spend between $845 – $2,350 on radon mitigation, with an average around $1,600. Local labor prices 6% below the national average, so Winston-Salem quotes tend to land at the lower end of national ranges.

Why is radon mitigation more or less expensive in Winston-Salem than elsewhere?

Licensed trade labor in Winston-Salem runs about 94% of the national average, and the best crews book out fastest in spring and early summer. North Carolina weather drives material choices here, so ask contractors what they install most often in Winston-Salem and why.

Do I need a permit for radon mitigation in Winston-Salem, North Carolina?

Most Winston-Salem, NC projects that change structure, electrical, plumbing or mechanical systems need a permit from the local building department; cosmetic work usually does not. Always confirm current requirements with the local building department before signing a contract, and make sure the permit is pulled by your licensed contractor.

How many quotes should I get in Winston-Salem?

Get at least three written quotes from licensed, insured North Carolina contractors. Comparing line items — not just the bottom line — is the fastest way to spot an inflated bid in the Winston-Salem metro market.

How much does radon mitigation cost in 2026?

Most homeowners pay between $900 and $2,500, with a national average near $1,700. Small, simple jobs land at the low end; large or premium-material jobs run well above the high end.

What is the cost per system?

Installed pricing usually runs $900.00 to $2,500.00 per system, including labor and materials. Expensive metros can run 15–45% higher than that range.

What drives the price up the most?

Scope and access. Larger quantities lower your per-system price, but difficult access, demolition of existing work, structural repairs found mid-job, premium materials and rush scheduling each add 8–30%.

Permits are typically required when the work changes structure or ties into electrical, plumbing, gas or mechanical systems. Budget $75–$600 in most cities and confirm whether your contractor pulls it — unpermitted work can block a future home sale.

How long does the job take?

Most residential projects of this type finish in one to five working days once materials are on site. Custom orders, inspections and weather are the usual causes of delay.

How many quotes should I get?

Three. Bids on the same scope commonly vary 20–40%, and the middle bid with the strongest warranty and references is usually the best value — the cheapest bid often excludes prep, disposal or permits.

Home/Cost guides/Radon Mitigation/Winston-Salem, NC

Winston-Salem metro · North Carolina

Radon Mitigation cost in Winston-Salem, NC

Winston-Salem homeowners typically pay $845 – $2,350 for radon mitigation. Local labor and materials price 6% below the national average.

Get my Winston-Salem estimate Use the Winston-Salem calculator

Winston-Salem average

$1,600

Typical low

$845

Typical high

$2,350

Per system

$845 – $2,350

Sample ZIP

What drives Winston-Salem pricing

Local labor

Licensed trade labor in Winston-Salem runs about 94% of the national average, and the best crews book out fastest in spring and early summer.

Permits & code

Most Winston-Salem, NC projects that change structure, electrical, plumbing or mechanical systems need a permit from the local building department; cosmetic work usually does not.

Climate & conditions

North Carolina weather drives material choices here, so ask contractors what they install most often in Winston-Salem and why.

Instant cost calculator

Adjust the inputs to see live pricing

Number of suction points1 system

Quality / material level

Site access

Removal / prep work

Timing

Estimated project cost

$941 – $1,283

Most homeowners pay around $1,112

Compare quality / material level

Cost by material in Winston-Salem

Installed Winston-Salem pricing per system.

Option	Installed cost	Pros	Cons
Single-point sub-slab system	$990 – $1,350	—	—
Sub-slab with sealing	$1,350 – $1,800	—	—
Crawlspace membrane system	$1,800 – $2,300	—	—
Multi-point system with monitoring	$2,300 – $3,200	—	—

Where the money goes in Winston-Salem

A typical $1,600 Winston-Salem project, broken down by line item.

Labor0.45% · $7
Materials0.38% · $6
Permits & inspections0.05% · $1
Overhead & profit0.12% · $2

Common add-ons

Extras that show up on Winston-Salem quotes but rarely in the headline price.

Post-mitigation testing

$140 – $280

Crawlspace vapor barrier

$1,400 – $4,700

Sump pit sealing

$190 – $750

Continuous radon monitor

$140 – $375

Ways to save in Winston-Salem

Test first with a $20 kit before commissioning a system.
Route the pipe on the least visible elevation to skip cosmetic upgrades.
Collect three written bids on an identical scope — spreads of 20–40% are normal.
Book in the off-season and stay flexible on the start date to save 5–15%.
Bundle nearby work into one mobilization so you only pay setup and travel once.
Ask what the contractor would change to cut 10% without hurting durability.

Winston-Salem FAQs

Get a Winston-Salem price you can budget against

Answer a few questions about your project and we'll model a low, average and premium price for your NC ZIP code — then connect you with vetted local pros.

Get free quotes from certified pros

More Winston-Salem research

Best radon mitigation companies in Winston-Salem Radon Mitigation permits in North Carolina Radon Mitigation near me All North Carolina prices

More North Carolina cities

Charlotte Raleigh Durham Greensboro Asheville Cary Wilmington

Other project costs in Winston-Salem

Fence Installation in Winston-Salem

$1,410 – $3,760

Roof Replacement in Winston-Salem

$7,990 – $31,960

Kitchen Remodel in Winston-Salem

$16,920 – $89,300

HVAC Replacement in Winston-Salem

$5,170 – $16,920

Deck Building in Winston-Salem

$4,136 – $11,280

Window Replacement in Winston-Salem

$423 – $1,410

See every Winston-Salem cost guide