How much does stucco repair cost in Gulfport, MS?

Most Gulfport homeowners spend between $1,400 – $4,300 on stucco repair, with an average around $2,850. Local labor prices 14% below the national average, so Gulfport quotes tend to land at the lower end of national ranges.

Why is stucco repair more or less expensive in Gulfport than elsewhere?

Licensed trade labor in Gulfport runs about 86% of the national average, and the best crews book out fastest in spring and early summer. Mississippi weather drives material choices here, so ask contractors what they install most often in Gulfport and why.

Do I need a permit for stucco repair in Gulfport, Mississippi?

Most Gulfport, MS projects that change structure, electrical, plumbing or mechanical systems need a permit from the local building department; cosmetic work usually does not. Always confirm current requirements with the local building department before signing a contract, and make sure the permit is pulled by your licensed contractor.

How many quotes should I get in Gulfport?

Get at least three written quotes from licensed, insured Mississippi contractors. Comparing line items — not just the bottom line — is the fastest way to spot an inflated bid in the Gulfport metro market.

How much does stucco repair cost in 2026?

Most homeowners pay between $1,600 and $5,000, with a national average near $3,300. Small, simple jobs land at the low end; large or premium-material jobs run well above the high end.

What is the cost per square foot?

Installed pricing usually runs $8.00 to $25.00 per square foot, including labor and materials. Expensive metros can run 15–45% higher than that range.

What drives the price up the most?

Scope and access. Larger quantities lower your per-square foot price, but difficult access, demolition of existing work, structural repairs found mid-job, premium materials and rush scheduling each add 8–30%.

Permits are typically required when the work changes structure or ties into electrical, plumbing, gas or mechanical systems. Budget $75–$600 in most cities and confirm whether your contractor pulls it — unpermitted work can block a future home sale.

How long does the job take?

Most residential projects of this type finish in one to five working days once materials are on site. Custom orders, inspections and weather are the usual causes of delay.

How many quotes should I get?

Three. Bids on the same scope commonly vary 20–40%, and the middle bid with the strongest warranty and references is usually the best value — the cheapest bid often excludes prep, disposal or permits.

Home/Cost guides/Stucco Repair/Gulfport, MS

Gulfport metro · Mississippi

Stucco Repair cost in Gulfport, MS

Gulfport homeowners typically pay $1,400 – $4,300 for stucco repair. Local labor and materials price 14% below the national average.

Get my Gulfport estimate Use the Gulfport calculator

Gulfport average

$2,850

Typical low

$1,400

Typical high

$4,300

Per square foot

$7 – $22

Sample ZIP

What drives Gulfport pricing

Local labor

Licensed trade labor in Gulfport runs about 86% of the national average, and the best crews book out fastest in spring and early summer.

Permits & code

Most Gulfport, MS projects that change structure, electrical, plumbing or mechanical systems need a permit from the local building department; cosmetic work usually does not.

Climate & conditions

Mississippi weather drives material choices here, so ask contractors what they install most often in Gulfport and why.

Instant cost calculator

Adjust the inputs to see live pricing

Damaged area (sq ft)200 square feet

Quality / material level

Site access

Removal / prep work

Timing

Estimated project cost

$1,672 – $2,280

Most homeowners pay around $1,976

Compare quality / material level

Cost by material in Gulfport

Installed Gulfport pricing per square foot.

Option	Installed cost	Pros	Cons
Patch and paint	$9 – $12	—	—
Partial re-stucco	$12 – $16	—	—
Full re-stucco (three coat)	$16 – $21	—	—
Stucco remediation with new WRB	$21 – $28	—	—

Where the money goes in Gulfport

A typical $2,850 Gulfport project, broken down by line item.

Labor0.45% · $13
Materials0.38% · $11
Permits & inspections0.05% · $1
Overhead & profit0.12% · $3

Common add-ons

Extras that show up on Gulfport quotes but rarely in the headline price.

Moisture testing

$260 – $775

Lath replacement

$3 – $10

Sealant and flashing

$260 – $1,300

Elastomeric coating

$1 – $3

Ways to save in Gulfport

Repair cracks early — water intrusion turns a $600 patch into a $12,000 remediation.
Bundle repair with a whole-wall coating for a uniform color.
Collect three written bids on an identical scope — spreads of 20–40% are normal.
Book in the off-season and stay flexible on the start date to save 5–15%.
Bundle nearby work into one mobilization so you only pay setup and travel once.
Ask what the contractor would change to cut 10% without hurting durability.

Gulfport FAQs

Get a Gulfport price you can budget against

Answer a few questions about your project and we'll model a low, average and premium price for your MS ZIP code — then connect you with vetted local pros.

Get free quotes from certified pros

More Gulfport research

Best stucco repair companies in Gulfport Stucco Repair permits in Mississippi Stucco Repair near me All Mississippi prices

More Mississippi cities

Jackson Southaven Hattiesburg

Other project costs in Gulfport

Fence Installation in Gulfport

$1,290 – $3,440

Roof Replacement in Gulfport

$7,310 – $29,240

Kitchen Remodel in Gulfport

$15,480 – $81,700

HVAC Replacement in Gulfport

$4,730 – $15,480

Deck Building in Gulfport

$3,784 – $10,320

Window Replacement in Gulfport

$387 – $1,290

See every Gulfport cost guide