How much does stucco repair cost in Washington, DC?

Most Washington homeowners spend between $2,100 – $6,500 on stucco repair, with an average around $4,300. Local labor prices 30% above the national average, so Washington quotes tend to land at the higher end of national ranges.

Why is stucco repair more or less expensive in Washington than elsewhere?

Licensed trade labor in Washington runs about 130% of the national average, and the best crews book out fastest in spring and early summer. District of Columbia weather drives material choices here, so ask contractors what they install most often in Washington and why.

Do I need a permit for stucco repair in Washington, District of Columbia?

Most Washington, DC projects that change structure, electrical, plumbing or mechanical systems need a permit from the local building department; cosmetic work usually does not. Always confirm current requirements with the local building department before signing a contract, and make sure the permit is pulled by your licensed contractor.

How many quotes should I get in Washington?

Get at least three written quotes from licensed, insured District of Columbia contractors. Comparing line items — not just the bottom line — is the fastest way to spot an inflated bid in the Washington metro market.

How much does stucco repair cost in 2026?

Most homeowners pay between $1,600 and $5,000, with a national average near $3,300. Small, simple jobs land at the low end; large or premium-material jobs run well above the high end.

What is the cost per square foot?

Installed pricing usually runs $8.00 to $25.00 per square foot, including labor and materials. Expensive metros can run 15–45% higher than that range.

What drives the price up the most?

Scope and access. Larger quantities lower your per-square foot price, but difficult access, demolition of existing work, structural repairs found mid-job, premium materials and rush scheduling each add 8–30%.

Permits are typically required when the work changes structure or ties into electrical, plumbing, gas or mechanical systems. Budget $75–$600 in most cities and confirm whether your contractor pulls it — unpermitted work can block a future home sale.

How long does the job take?

Most residential projects of this type finish in one to five working days once materials are on site. Custom orders, inspections and weather are the usual causes of delay.

How many quotes should I get?

Three. Bids on the same scope commonly vary 20–40%, and the middle bid with the strongest warranty and references is usually the best value — the cheapest bid often excludes prep, disposal or permits.

Home/Cost guides/Stucco Repair/Washington, DC

Washington metro · District of Columbia

Stucco Repair cost in Washington, DC

Washington homeowners typically pay $2,100 – $6,500 for stucco repair. Local labor and materials price 30% above the national average.

Get my Washington estimate Use the Washington calculator

Washington average

$4,300

Typical low

$2,100

Typical high

$6,500

Per square foot

$10 – $33

Sample ZIP

What drives Washington pricing

Local labor

Licensed trade labor in Washington runs about 130% of the national average, and the best crews book out fastest in spring and early summer.

Permits & code

Most Washington, DC projects that change structure, electrical, plumbing or mechanical systems need a permit from the local building department; cosmetic work usually does not.

Climate & conditions

District of Columbia weather drives material choices here, so ask contractors what they install most often in Washington and why.

Instant cost calculator

Adjust the inputs to see live pricing

Damaged area (sq ft)200 square feet

Quality / material level

Site access

Removal / prep work

Timing

Estimated project cost

$2,470 – $3,420

Most homeowners pay around $2,945

Compare quality / material level

Cost by material in Washington

Installed Washington pricing per square foot.

Option	Installed cost	Pros	Cons
Patch and paint	$13 – $18	—	—
Partial re-stucco	$18 – $24	—	—
Full re-stucco (three coat)	$24 – $31	—	—
Stucco remediation with new WRB	$31 – $43	—	—

Where the money goes in Washington

A typical $4,300 Washington project, broken down by line item.

Labor0.45% · $19
Materials0.38% · $16
Permits & inspections0.05% · $2
Overhead & profit0.12% · $5

Common add-ons

Extras that show up on Washington quotes but rarely in the headline price.

Moisture testing

$390 – $1,150

Lath replacement

$5 – $16

Sealant and flashing

$390 – $1,950

Elastomeric coating

$2 – $5

Ways to save in Washington

Repair cracks early — water intrusion turns a $600 patch into a $12,000 remediation.
Bundle repair with a whole-wall coating for a uniform color.
Collect three written bids on an identical scope — spreads of 20–40% are normal.
Book in the off-season and stay flexible on the start date to save 5–15%.
Bundle nearby work into one mobilization so you only pay setup and travel once.
Ask what the contractor would change to cut 10% without hurting durability.

Washington FAQs

Get a Washington price you can budget against

Answer a few questions about your project and we'll model a low, average and premium price for your DC ZIP code — then connect you with vetted local pros.

Get free quotes from certified pros

More Washington research

Best stucco repair companies in Washington Stucco Repair permits in District of Columbia Stucco Repair near me All District of Columbia prices

Other project costs in Washington

Fence Installation in Washington

$1,950 – $5,200

Roof Replacement in Washington

$11,050 – $44,200

Kitchen Remodel in Washington

$23,400 – $123,500

HVAC Replacement in Washington

$7,150 – $23,400

Deck Building in Washington

$5,720 – $15,600

Window Replacement in Washington

$585 – $1,950

See every Washington cost guide