How much does drywall installation cost in Midland, TX?

Most Midland homeowners spend between $1,500 – $3,500 on drywall installation, with an average around $2,500. Local labor prices right at the national average, so Midland quotes tend to land at the higher end of national ranges.

Why is drywall installation more or less expensive in Midland than elsewhere?

Licensed trade labor in Midland runs about 100% of the national average, and the best crews book out fastest in spring and early summer. Texas weather drives material choices here, so ask contractors what they install most often in Midland and why.

Do I need a permit for drywall installation in Midland, Texas?

Most Midland, TX projects that change structure, electrical, plumbing or mechanical systems need a permit from the local building department; cosmetic work usually does not. Always confirm current requirements with the local building department before signing a contract, and make sure the permit is pulled by your licensed contractor.

How many quotes should I get in Midland?

Get at least three written quotes from licensed, insured Texas contractors. Comparing line items — not just the bottom line — is the fastest way to spot an inflated bid in the Midland metro market.

How much does drywall installation cost in 2026?

Most homeowners pay between $1,500 and $3,500, with a national average near $2,500. Small, simple jobs land at the low end; large or premium-material jobs run well above the high end.

What is the cost per square foot?

Installed pricing usually runs $1.50 to $3.50 per square foot, including labor and materials. Expensive metros can run 15–45% higher than that range.

What drives the price up the most?

Scope and access. Larger quantities lower your per-square foot price, but difficult access, demolition of existing work, structural repairs found mid-job, premium materials and rush scheduling each add 8–30%.

Permits are typically required when the work changes structure or ties into electrical, plumbing, gas or mechanical systems. Budget $75–$600 in most cities and confirm whether your contractor pulls it — unpermitted work can block a future home sale.

How long does the job take?

Most residential projects of this type finish in one to five working days once materials are on site. Custom orders, inspections and weather are the usual causes of delay.

How many quotes should I get?

Three. Bids on the same scope commonly vary 20–40%, and the middle bid with the strongest warranty and references is usually the best value — the cheapest bid often excludes prep, disposal or permits.

Home/Cost guides/Drywall Installation/Midland, TX

Midland metro · Texas

Drywall Installation cost in Midland, TX

Midland homeowners typically pay $1,500 – $3,500 for drywall installation. Local labor and materials price right at the national average.

Get my Midland estimate Use the Midland calculator

Midland average

$2,500

Typical low

$1,500

Typical high

$3,500

Per square foot

$2 – $4

Sample ZIP

What drives Midland pricing

Local labor

Licensed trade labor in Midland runs about 100% of the national average, and the best crews book out fastest in spring and early summer.

Permits & code

Most Midland, TX projects that change structure, electrical, plumbing or mechanical systems need a permit from the local building department; cosmetic work usually does not.

Climate & conditions

Texas weather drives material choices here, so ask contractors what they install most often in Midland and why.

Instant cost calculator

Adjust the inputs to see live pricing

Drywall area (sq ft)1,000 square feet

Quality / material level

Site access

Removal / prep work

Timing

Estimated project cost

$1,473 – $2,024

Most homeowners pay around $1,748

Compare quality / material level

Cost by material in Midland

Installed Midland pricing per square foot.

Option	Installed cost	Pros	Cons
Hang only	$2 – $2	—	—
Hang, tape and finish (Level 4)	$2 – $3	—	—
Level 5 smooth finish	$3 – $4	—	—
Moisture / fire-rated assemblies	$4 – $5	—	—

Where the money goes in Midland

A typical $2,500 Midland project, broken down by line item.

Labor0.45% · $11
Materials0.38% · $10
Permits & inspections0.05% · $1
Overhead & profit0.12% · $3

Common add-ons

Extras that show up on Midland quotes but rarely in the headline price.

Ceiling texture removal

$500 – $2,500

Insulation before board

$400 – $2,000

Corner bead and archways

$150 – $800

Painting after finish

$500 – $2,500

Ways to save in Midland

Order board delivered to the room to avoid carry charges.
Accept a Level 4 finish unless walls take raking light.
Collect three written bids on an identical scope — spreads of 20–40% are normal.
Book in the off-season and stay flexible on the start date to save 5–15%.
Bundle nearby work into one mobilization so you only pay setup and travel once.
Ask what the contractor would change to cut 10% without hurting durability.

Midland FAQs

Get a Midland price you can budget against

Answer a few questions about your project and we'll model a low, average and premium price for your TX ZIP code — then connect you with vetted local pros.

Get free quotes from certified pros

More Midland research

Best drywall installation companies in Midland Drywall Installation permits in Texas Drywall Installation near me All Texas prices

More Texas cities

Dallas Fort Worth Plano Frisco Arlington Irving McKinney Denton

Other project costs in Midland

Fence Installation in Midland

$1,500 – $4,000

Roof Replacement in Midland

$8,500 – $34,000

Kitchen Remodel in Midland

$18,000 – $95,000

HVAC Replacement in Midland

$5,500 – $18,000

Deck Building in Midland

$4,400 – $12,000

Window Replacement in Midland

$450 – $1,500

See every Midland cost guide