How much does cabinet refacing cost in McKinney, TX?

Most McKinney homeowners spend between $2,600 – $9,150 on cabinet refacing, with an average around $5,900. Local labor prices 4% above the national average, so McKinney quotes tend to land at the higher end of national ranges.

Why is cabinet refacing more or less expensive in McKinney than elsewhere?

Growth-corridor suburb with steady demand and slightly premium pricing. Hail exposure and heavy clay soils affect foundations.

Do I need a permit for cabinet refacing in McKinney, Texas?

City permits and HOA approvals are common. Always confirm current requirements with the local building department before signing a contract, and make sure the permit is pulled by your licensed contractor.

How many quotes should I get in McKinney?

Get at least three written quotes from licensed, insured Texas contractors. Comparing line items — not just the bottom line — is the fastest way to spot an inflated bid in the Dallas-Fort Worth market.

How much does cabinet refacing cost in 2026?

Most homeowners pay between $2,500 and $8,800, with a national average near $5,650. Small, simple jobs land at the low end; large or premium-material jobs run well above the high end.

What is the cost per linear foot?

Installed pricing usually runs $100.00 to $350.00 per linear foot, including labor and materials. Expensive metros can run 15–45% higher than that range.

What drives the price up the most?

Scope and access. Larger quantities lower your per-linear foot price, but difficult access, demolition of existing work, structural repairs found mid-job, premium materials and rush scheduling each add 8–30%.

Permits are typically required when the work changes structure or ties into electrical, plumbing, gas or mechanical systems. Budget $75–$600 in most cities and confirm whether your contractor pulls it — unpermitted work can block a future home sale.

How long does the job take?

Most residential projects of this type finish in one to five working days once materials are on site. Custom orders, inspections and weather are the usual causes of delay.

How many quotes should I get?

Three. Bids on the same scope commonly vary 20–40%, and the middle bid with the strongest warranty and references is usually the best value — the cheapest bid often excludes prep, disposal or permits.

Home/Cost guides/Cabinet Refacing/McKinney, TX

Dallas-Fort Worth · Texas

Cabinet Refacing cost in McKinney, TX

McKinney homeowners typically pay $2,600 – $9,150 for cabinet refacing. Local labor and materials price 4% above the national average.

Get my McKinney estimate Use the McKinney calculator

McKinney average

$5,900

Typical low

$2,600

Typical high

$9,150

Per linear foot

$105 – $365

Sample ZIP

75069

What drives McKinney pricing

Local labor

Growth-corridor suburb with steady demand and slightly premium pricing.

Permits & code

City permits and HOA approvals are common.

Climate & conditions

Hail exposure and heavy clay soils affect foundations.

Instant cost calculator

Adjust the inputs to see live pricing

Cabinet run (linear feet)25 linear feet

Quality / material level

Site access

Removal / prep work

Timing

Estimated project cost

$3,444 – $4,750

Most homeowners pay around $4,097

Compare quality / material level

Cost by material in McKinney

Installed McKinney pricing per linear foot.

Option	Installed cost	Pros	Cons
Rigid thermofoil	$145 – $200	—	—
Wood veneer	$200 – $260	—	—
Solid wood doors	$260 – $340	—	—
Custom paint-grade solid wood	$340 – $470	—	—

Where the money goes in McKinney

A typical $5,900 McKinney project, broken down by line item.

Labor0.45% · $27
Materials0.38% · $22
Permits & inspections0.05% · $3
Overhead & profit0.12% · $7

Common add-ons

Extras that show up on McKinney quotes but rarely in the headline price.

New hardware

$105 – $625

Soft-close hinges and slides

$210 – $935

Pull-out shelving

$155 – $520

Crown molding

$310 – $1,250

Ways to save in McKinney

Reface only the uppers and paint the lowers for a two-tone look.
Reuse existing hardware if the hole spacing matches.
Collect three written bids on an identical scope — spreads of 20–40% are normal.
Book in the off-season and stay flexible on the start date to save 5–15%.
Bundle nearby work into one mobilization so you only pay setup and travel once.
Ask what the contractor would change to cut 10% without hurting durability.

McKinney FAQs

Get a McKinney price you can budget against

Answer a few questions about your project and we'll model a low, average and premium price for your TX ZIP code — then connect you with vetted local pros.

Get free quotes from certified pros

More McKinney research

Best cabinet refacing companies in McKinney Cabinet Refacing permits in Texas Cabinet Refacing near me All Texas prices

Cabinet Refacing cost near McKinney

Cabinet Refacing cost in Dallas, TX

$2,550 – $8,974

Cabinet Refacing cost in Fort Worth, TX

$2,500 – $8,798

Cabinet Refacing cost in Plano, TX

$2,625 – $9,238

Cabinet Refacing cost in Frisco, TX

$2,650 – $9,326

Cabinet Refacing cost in Arlington, TX

$2,475 – $8,710

Cabinet Refacing cost in Irving, TX

$2,500 – $8,798

More Texas cities

Denton Garland Houston Katy Sugar Land The Woodlands Pearland Pasadena

Other project costs in McKinney

Fence Installation in McKinney

$1,560 – $4,160

Roof Replacement in McKinney

$8,840 – $35,360

Kitchen Remodel in McKinney

$18,720 – $98,800

HVAC Replacement in McKinney

$5,720 – $18,720

Deck Building in McKinney

$4,576 – $12,480

Window Replacement in McKinney

$468 – $1,560

See every McKinney cost guide