How much does cabinet refacing cost in Waco, TX?

Most Waco homeowners spend between $2,400 – $8,450 on cabinet refacing, with an average around $5,400. Local labor prices 4% below the national average, so Waco quotes tend to land at the lower end of national ranges.

Why is cabinet refacing more or less expensive in Waco than elsewhere?

Licensed trade labor in Waco runs about 96% of the national average, and the best crews book out fastest in spring and early summer. Texas weather drives material choices here, so ask contractors what they install most often in Waco and why.

Do I need a permit for cabinet refacing in Waco, Texas?

Most Waco, TX projects that change structure, electrical, plumbing or mechanical systems need a permit from the local building department; cosmetic work usually does not. Always confirm current requirements with the local building department before signing a contract, and make sure the permit is pulled by your licensed contractor.

How many quotes should I get in Waco?

Get at least three written quotes from licensed, insured Texas contractors. Comparing line items — not just the bottom line — is the fastest way to spot an inflated bid in the Waco metro market.

How much does cabinet refacing cost in 2026?

Most homeowners pay between $2,500 and $8,800, with a national average near $5,650. Small, simple jobs land at the low end; large or premium-material jobs run well above the high end.

What is the cost per linear foot?

Installed pricing usually runs $100.00 to $350.00 per linear foot, including labor and materials. Expensive metros can run 15–45% higher than that range.

What drives the price up the most?

Scope and access. Larger quantities lower your per-linear foot price, but difficult access, demolition of existing work, structural repairs found mid-job, premium materials and rush scheduling each add 8–30%.

Permits are typically required when the work changes structure or ties into electrical, plumbing, gas or mechanical systems. Budget $75–$600 in most cities and confirm whether your contractor pulls it — unpermitted work can block a future home sale.

How long does the job take?

Most residential projects of this type finish in one to five working days once materials are on site. Custom orders, inspections and weather are the usual causes of delay.

How many quotes should I get?

Three. Bids on the same scope commonly vary 20–40%, and the middle bid with the strongest warranty and references is usually the best value — the cheapest bid often excludes prep, disposal or permits.

Home/Cost guides/Cabinet Refacing/Waco, TX

Waco metro · Texas

Cabinet Refacing cost in Waco, TX

Waco homeowners typically pay $2,400 – $8,450 for cabinet refacing. Local labor and materials price 4% below the national average.

Get my Waco estimate Use the Waco calculator

Waco average

$5,400

Typical low

$2,400

Typical high

$8,450

Per linear foot

$96 – $335

Sample ZIP

What drives Waco pricing

Local labor

Licensed trade labor in Waco runs about 96% of the national average, and the best crews book out fastest in spring and early summer.

Permits & code

Most Waco, TX projects that change structure, electrical, plumbing or mechanical systems need a permit from the local building department; cosmetic work usually does not.

Climate & conditions

Texas weather drives material choices here, so ask contractors what they install most often in Waco and why.

Instant cost calculator

Adjust the inputs to see live pricing

Cabinet run (linear feet)25 linear feet

Quality / material level

Site access

Removal / prep work

Timing

Estimated project cost

$3,206 – $4,394

Most homeowners pay around $3,800

Compare quality / material level

Cost by material in Waco

Installed Waco pricing per linear foot.

Option	Installed cost	Pros	Cons
Rigid thermofoil	$135 – $185	—	—
Wood veneer	$185 – $240	—	—
Solid wood doors	$240 – $315	—	—
Custom paint-grade solid wood	$315 – $430	—	—

Where the money goes in Waco

A typical $5,400 Waco project, broken down by line item.

Labor0.45% · $24
Materials0.38% · $21
Permits & inspections0.05% · $3
Overhead & profit0.12% · $6

Common add-ons

Extras that show up on Waco quotes but rarely in the headline price.

New hardware

$96 – $575

Soft-close hinges and slides

$190 – $865

Pull-out shelving

$145 – $480

Crown molding

$290 – $1,150

Ways to save in Waco

Reface only the uppers and paint the lowers for a two-tone look.
Reuse existing hardware if the hole spacing matches.
Collect three written bids on an identical scope — spreads of 20–40% are normal.
Book in the off-season and stay flexible on the start date to save 5–15%.
Bundle nearby work into one mobilization so you only pay setup and travel once.
Ask what the contractor would change to cut 10% without hurting durability.

Waco FAQs

Get a Waco price you can budget against

Answer a few questions about your project and we'll model a low, average and premium price for your TX ZIP code — then connect you with vetted local pros.

Get free quotes from certified pros

More Waco research

Best cabinet refacing companies in Waco Cabinet Refacing permits in Texas Cabinet Refacing near me All Texas prices

More Texas cities

Dallas Fort Worth Plano Frisco Arlington Irving McKinney Denton

Other project costs in Waco

Fence Installation in Waco

$1,440 – $3,840

Roof Replacement in Waco

$8,160 – $32,640

Kitchen Remodel in Waco

$17,280 – $91,200

HVAC Replacement in Waco

$5,280 – $17,280

Deck Building in Waco

$4,224 – $11,520

Window Replacement in Waco

$432 – $1,440

See every Waco cost guide